cattle crush cattle squeeze chute cattle scale(XMM-CRUSH)
Our company specialize in different type of Cattle panel, horse panel, sheep panel, cattle yard, horse yard and sheep yard. mainly export to Australia, South America, etc.
Sincerely hope to cooperate with you. As the manufacturer and exporter of ISO factory and SGS report, we can ensure every client of us can get good quality of our products with nice price on schedule. Welcome to contact us anytime.
Cattle crush has an internal width 750mm, overall length about 3.05m, 4 doors on the operating side and no doors on the other side. The cattle crush is supplied as 4 pieces kit(headbale, 2 sides & a slide gate)which just pins together.
| Cattle headbail | With auto-wrench Pre galvanized, zinc coating 100g/m2 Fully 360degree welded, 2050mm high, 1650mm wide Internal width is 750mm(does not including vertical tube) All the tubes are 50x50x1.6mm square tubes Galvanized sheet, With welded caps | 1 piece |
| Sliding gate | Sliding gate Pre hot dipped galvanized,zinc coating 100g/m2 2050mm high, 1060mm wide Frame tube: 50x50x2mm Internal width is 750mm(does not including vertical tube) 6 Rail of 40x80x1.6mm with the rail evenly spaced Big Pulley: 3 sets per door A small plastic wheel in the bottom Handle:32mm round pipes With welded caps 1 flat feet With 8 U lugs: 100x60x4mm | 1 piece |
| Cattle crush side panel | Cattle panel on one side Pre galvanized, zinc coating 100g/m2 Fully 360degree welded 2000mm high, 3050mm long. All the tubes are 50x50x2mm With 7 rails, 4 rails with galvanized sheet, 3 rails are not. Galvanized sheet is 1.0mm thick. With caps, lugs and pins Cattle panel gates on the other side Total 2000mm high, 3050mm long. All the tubes are 50x50x2mm Total 4 doors, with spring latched lock Longer door, inertnal wide is 1995mm Smaller door, internal wide is 725mm With caps, lugs and pins | 1 set |
Sliding gate
Vet crush
Premium vet crush
Cattle crush with weighing scale
We are professional manufacturer of cattle yard, including cattle panels, cattle panel gate, man gate, sliding gate, Vet crush, Headbail, G force etc. we can meet any of your requirements.
Contact us for more details.
Materials: Carbon steel
Corrosion Form: Hot-dipped galvanized or paint
Features: It can quickly and easily be installed, without the need to disturb the surface area by digging holes or laying foundations.
Description:
-1.8m high with 6 bars/rails or 1.6m high with 5 bars/rails.
-Complete with Caps & Foot plates.
-Holes for ground pin on one leg of each panel.
-Elongated lug holes in brackets, for ease when connecting.
Oval rails cattle panel cattle yard
| material: | pre hot dipped galvanized steel pipe |
| finishing(zinc coating): | mor than 15 microns |
| HeightxLength: | 1800mm x 2100mm |
| vertical pipe: | 50 x 50mm RHS or 40 x 40mm RHS x 1.6 mm thick with fully welded caps |
| horizontal rails: | 40mmx80mm or 30mm x 60mm x1.6mm thck x 6 rails bull bars( oval rails) |
| Welding: | Fully welded post brackets |
| welds: | bull bars are fully welded, each weld is protected with epoxy paint |
Our panels are ,
1)All the panels are pre hot dipped galvnaized.
2)360 degrees hand welded for more strength.
3) Metal caps are welded on the top of vertical tube,it can prevent the rain entering into the tube and make the panel rust.
4)The"U" and "L" lugs with round edge, which will not hurt the animals and they can connect the panels together by pins.
5)Foot plate welded on the bottom of post,and it can be fixed on the floor.
6)welding spots neat and smooth, prevent cattle or cows from getting hurt, very safe
7)welding spots anti-rust finish, very durable, can last 5 years
There are about 30x40'HQ export every month
Other related products, like cattle panel gate, man gate, sliding gate, loading ramp, hay feeder etc are also available.